UPS UPS
MZ 60K-200K

SPECIFIKACIJA
MZ 60K-200K
TECHNOLOGY:
True On-Line, Double Conversion
CLASSIFICATION:
VFI-SS-111
POWER RANGE:
60 - 200 kVA
No. OF PHASES:
3:3

APPLICATION:

Large computer networks, Data processing centers, Industrial facilities and equipment, Laboratory equipment, Telecommunication, Automation and control systems

DOWNLOAD:

KARAKTERISTIČNA
  • Technology True On-Line Double Conversion provides excellent output voltage parameters regardless of power disturbances and the type of receivers being powered.
  • Rectifier IGBT the most advanced technology ensuring very low THDi and high power factor.
  • Modular hot swap design for both UPS power modules and a module bypass, allows maintenance or repair work without turning off the inverter. 30kW and 40 kW hot swappable power modules.
  • Automatic bypass - uninterrupted ensures uninterrupted power supply to critical loads such as overheating or failure.
  • Service bypass - enables servicing of devices without switching off powered receivers. Separate power supply Bypass track provides the ability to provide a reserve power source for receivers even in the event of a device failure or UPS protection in the main track.
  • Communication interfaces:
    - RS485, MODBUS to monitor and manage the operation of the power supply and receivers,
    - DryContact in/out relay contacts for cooperation with BMS systems,
    - SNMP integration with NMS network management systems,
    - Remote switch connector against Fire (REPO) to ensure remote disconnection of power supply to receivers in the event of a fire,
    - Switch aginst Fire (EPO) on the control panel it enables immediate disconnection of power from the receivers,
  • Touch control and monitoring panel gives the possibility of diagnostics of parameters and operation mode of the power supply and enables registration of events. Available languages include Polish, English.
  • Small dimensions , thanks to which a large space for installing the device is not required. Power packing at 211 kW / m2.
  • High efficiency of the device 96% It reduces the own losses of the device and reduces the heat emitted, making possible cooling of the rooms easier and cheaper. Compared to 80kVA devices with efficiency of 94%, annual savings of USD 7,000 are achieved (assuming energy prices of 0.5 USD / kWh).
  • ECO-Mode (HE) It allows for a significant reduction of the unit's operating costs and virtually eliminates heat emission.
  • Configured amount of batteries and charging current - it enables precise selection of the required time of autonomy.
  • Function Self-Aging allows you to test the device with full load, even without connected receivers.
  • Automatic diagnostics with FTM (Fault Trace Management) and fully digital control (32 bit DSP x2) guarantees full device efficiency, control of components and operating parameters without the need for user intervention.
  • High value of the input power factor limits the value of the current consumed by the device from the network.
  • Maximum value of the output power factor PF = 1 provides 20% more active power than standard solutions with PF = 0.8.
  • Maximum wide input voltage range -60% ÷ + 25% in normal operation mode, it ensures stable operation of the device without the need to use batteries, which significantly affects the extension of their service life.
  • A wide range of input frequencies in the normal operation mode, it allows free use of the power supply in a network with unstable parameters and power supply from the generator set.
  • Simplicity of use ease of connection to the network and simple switching on and off of the device does not require special qualifications from the user.
  • Advanced battery management - it guarantees optimal charging and use of batteries, increases their lifespan and lowers operating costs.
  • Excellent quality of output voltage achieved thanks to the use of the IGBT inverter using highly advanced PWM control technology, it provides voltage with stable parameters, regardless of the power disturbances and the type of powered equipment.
  • High overload provides device protection and continuity of power supply in the presence of transient transients, and reduces the need for oversizing the device in relation to the power of the receivers.
  • Advanced software allowing the user full control over the device and powered receivers.
  • Configurable work parameters nominal voltages, frequencies, preferred modes of operation, communication method - significantly broadens the range of possible applications.
  • Redundant configurations:
    - Redundant work for increased reliability
    - Capacitive parallel operation for increased power
    - HotStandby operation (separated rectifier and bypass power supply)
PARAMETRI
Model MZ 60K MZ 80K MZ 100K MZ 120K MZ 160K MZ 200K
Power 60kW 80kW 100kW 120kW 160kW 200kW
No of phases IN : OUT 3:3
Hotswap power modules 30kVA/kW 40 kVA/kW 50 kVA/kW 40 kVA/kW 50 kVA/kW
Input
Nominal Voltage 380 / 400 / 415 VAC
Voltage range 92÷287 Vac (L-N) / 160÷500 Vac (L-L)
Frequency 50/60 Hz
Frequency range -20% ÷ +20 %
THDi <3%
Input power factor >0,99
Output
Power factor 1,0
Nominal voltage 380 / 400 / 415 VAC
Static / dynamic voltage regulation ±1% / ±3%
THDu linear / not linear load <1% / <3%
Nominal frequency 50/60 Hz ±0,05 Hz
Inverter overload resistance 105% - cont.; 115% - 60 min., 130% - 10 min., 150% - 60 sec., >151% - 0,2 sec.
Efficiency in On-Line mode >96%
Efficiency in Eco mode 99%
Crest factor 3:1
Cold start Yes
Battery
Type Sealed maintenance-free VRLA
No. of batteries in string Configurable: 30 ÷ 40 psc
Maximum charging current 20 A 30 A 40 A 50 A
Charging time 3 - 8 hours to 90% capacity (configurable)
Charging cycle According to DIN 41773 with automatic shutdown of charging according to the criterion of current and voltage, with time control.
Bypass
Automatic bypass Static switch type Bypass, uninterruptible changeover.
Bypass manual mechanical Standard
Dimensions and weight
Dimensions (W x D x H) 450 x 840 x 967 mm 450 x 840 x 1400 mm 600 x 900 x 1600 mm
Weight 160 kg 210 kg 212 kg 242 kg 300 kg 342 kg
Signaling and communication ports
Work status indicator 4.3-7.0 "touch display, LED indicators, audible alarm
Standard communication 3 x Smart Slot for additional communication cards,
2 x REPO (NO/NC), 3 x Dry Contact Out, RS485, Modbus
Environmental conditions
Noise level <60 dB
Permissible operating temperature 0 °C ÷ 40 °C
Recommended working temperature 15 °C ÷ 25 °C
Storage temperature -25°C ÷ 55°C
Humidity 0 ÷ 95% (without condensation)
Standards
Resistance to interference EN 62040-2:2005, EN 62040-2:2006
Safety CE, EN62040-1-1
Optional equipment

- SNMP card
- RS 232
- Uninterruptible Bypass External
- Additional Dry Contact card
- Output transformer for galvanic separation

- Batteries in rack or in battery modules
- Sensor for battery voltage compensation
- Remote signaling panel
- Backfeed protection contactor


Due to constant product improvement all specifications are subject to change without notice.
VI - Line Interactive (VI in accordance with PN-EN 62040-3)
VFI - True On Line (VFI in accordance with PN-EN 62040-3)

SELECT ANOTHER UPS

BASIC 1K
Model
BASIC 1K
Tip
UPS VFI
Domet
1 kVA
Tip
1:1
BW
Model
BW300
Tip
VFI-SS-111
Domet
30 - 300 kVA
Tip
3:3
CORE
Model
CORE 1-3
Tip
UPS VFI
Domet
1-3 kVA
Tip
1:1
CORE 3K TL
Model
CORE 3K TL
Tip
UPS VFI
Domet
3 kVA
Tip
1:1
CORE
Model
CORE 6-10
Tip
UPS VFI
Domet
6-10 kVA
Tip
1:1
HS105
Model
HS105
Tip
UPS VFI
Domet
50 - 100 kVA
Tip
3:3
HS205
Model
HS205
Tip
UPS VFI
Domet
50 - 200 kVA
Tip
3:3
HS305
Model
HS305
Tip
UPS VFI
Domet
50 - 300 kVA
Tip
3:3
HS505
Model
HS505
Tip
UPS VFI
Domet
50 - 500 kVA
Tip
3:3
UPS JR
Model
JR
Tip
UPS VFI
Domet
10 - 20 kVA
Tip
3:3 / 3:1
MR
Model
MR
Tip
VFI-SS-111
Domet
50 ÷ 600 kVA
Tip
3:3
MY 30K
Model
MY 30K
Tip
UPS VFI
Domet
30 kVA
Tip
3:3 / 3:1
NGS 40
Model
NGS 40
Tip
UPS VFI
Domet
40 kVA
Tip
3:3
PKX
Model
PKX
Tip
UPS VFI
Domet
10 kVA
Tip
3:3
PRM 6
Model
PRM 6
Tip
UPS VFI
Domet
6 kVA
Tip
1:1
UPS  WINTER
Model
WINTER
Tip
UPS VI
Domet
3 kVA
Tip
1:1

SHORTCUTS

Pracownik w kasku ochronnym Do you need help?
Tel: +48 58 556 13 13
E-mail: info@comex.com.pl

comex Filing a Complaint
Tel: +48 58 556 13 13
E-mail: info@comex.com.pl