UPS UPS
MR

SPECIFICATION
TECHNOLOGY:
True On-Line, Double Conversion
CLASSIFICATION:
VFI-SS-111 (EN 62040-3)
POWER RANGE:
50 ÷ 600 kVA
No. OF PHASES:
3:3

APPLICATIONS:

Large computer networks, data processing centres, clusters, medical and industrial equipment, tele-information systems, automation and control systems

DOWNLOAD:

CHARACTERISTICS
  • True On-Line Double Conversion Technology provides perfect output voltage parameters, regardless of the input voltage and the load.
  • Modular topology with HOTSWAP modules - possibility to extend UPS up to 600kVA in one case without any interruption to the load. Hot swap modules 50kVA/kW provides very low
  • MTTR which brings to the customer huge reliable of whole system.
  • Rectifier and Inverter SPWM IGBT - lower cost - simple hardware circuit - high IGBT utilization - excellent THDi and Input Power Factor performance.
  • Automatic Bypass (Static Switch) provides continuous load supply in critical conditions, such as overheating or inverter failure. HotSwap bypass function allow to maintenance without interruption.
  • Maintenance Bypass (uninterruptible) enables service handling without necessity of shutting off the load.
  • Separate supplying of Bypass line provides reserve power source for load even when the UPS is damaged or main line protection is affected.
  • Up to four unit parallel work for capacity or redundancy
  • Communication:
    Modbus, RS-232, USB for managing UPS
    Dry Contact alarm indicators; work with BMS systems,
    SNMP integration with systems management network NMS,
  • High efficiency (up to 97%) reduces heat dissipation and limits power consumption costs.
  • LCD Control Panel displays UPS and power parameters as well as hundreds of useful information.
  • Small dimensions - requires small area for unit operation.
  • Modular design – fast maintenance and short MTTR.
  • ECO-Mode gives possibility of significant cost reduction and in practice stops heat emission.
  • Smart sleep mode to improve operating efficiency and reduce operating costs; Cycle maintenance, effectively extending the life of the system and improving the efficiency of the whole machine.
  • High input power factor reduces the value of current drawn from the mains.
  • Highest output power factor PF=1 allows to connect much more equipment in comparison to the UPS with PF=0,8 or 0,9.
  • Wide input voltage range for normal mode ensures that the batteries are used only if necessary - in fact, only when the input voltage is completely lost.
  • Wide input frequency range for normal mode gives possibility for seamless operation with different power sources - as mains or the generating set.
  • Simple maintenance - microprocessor control and 24h/7 operation mode, means that the unit doesn't require specialized handling. History log with 10 000 items.
  • Advanced Battery Management gives reliability of optimal charging and using batteries, elongates its lifetime and reduces operating costs.
  • Excellent voltage quality is provided by IGBT inverter and high-frequency PWM technology; the output voltage has always stable parameters, independent of input disturbances and the load characteristics.
  • High overload capacity indicates power reliability during transient conditions and high resistance on handling faults. 130% - 10 minutes and 150% - 1 minute.
  • User configurable settings - enable user to set nominal voltages, frequency, preferred operating modes.
  • Remote Emergency Power Off port (REPO) provides remote shutting off the load and UPS in case of emergency.
  • Configurable batteries quantity 30-46 pcs and charging current – allows user to set required autonomy time.
  • Redundancy configurations:
    - Parallel for capacity or redundancy, N+X≤10
    - Hot Standby
    - Load bus synchronization
PARAMETERS
Model MR 600K
Power 50 – 600k
Number of phases IN:OUT 3:3
Input
Voltage 380 / 400 / 415 VAC
Voltage range 138 – 485 VAC
Frequency 50 / 60 Hz
Frequency range 40 – 70 Hz
THDi <3%
Input power factor ≥ 0,99
Output
Voltage 380 / 400 / 415 VAC
Voltage regulation static/dynamic ±1% / ±2%
Frequency 50 / 60 ± 0,01 Hz
Overload capacity 110% - 60 min, 125% - 10 min., 150% - 60 sec., >150% - 200 ms
Efficiency Up to 97%
Eco Mode efficiency 99%
Crest factor 3:1
Batteries
Type Maintenance free, sealed VRLA AGM, ready for Lithium batteries
Configurable batteries 30-46 pcs. 12V
Charging 3 ÷ 8 hours up to 90% of capacity
Weight and dimensions
Dimensions of UPS (WxDxH) 1200 x 860 x 2000 mm
Weight of cabinet 427 kg
Weight of power module 33 kg
Weight of bypass module 31 kg
Communications
Operation mode indicators Touchable 7“LCD display, LED indicators, sound alarm, inbuild 4 channel oscilloscope
Communication RS232, RS485, MODBUS 485, USB, Dry Contact, SNMP, REPO, parallel slots
Environmental
Noise Level depending the load
and temp.
< 70 dB (A)
Operating temperature for UPS 0 °C ÷ 40 °C
Recommended operating temperature for
UPS and batteries
15 °C ÷ 25 °C
Storage temperature - 15 °C ÷ 55 °C
Humidity 5 ÷ 95 % (without condensation)
Standards
Standards EN 62040-2:2005, EN 62040-2:2006, EN 60950-1, CE
Options
- SNMP card
- Uninterruptible External Maintenance Bypass
- Remote status panel
- Software
- Battery cabinets or rack.

Due to constant product improvement all specifications are subject to change without notice.
VI - Line Interactive (VI in accordance with PN-EN 62040-3)
VFI - True On Line (VFI in accordance with PN-EN 62040-3)

SELECT ANOTHER UPS

BASIC 1K
Model
BASIC 1K
Type
UPS VFI
Range
1 kVA
Class
1:1
BM
Model
BM
Type
VFI-SS-111
Range
300-1200 kW
Class
3:3
BW
Model
BW300
Type
VFI-SS-111
Range
30 - 300 kVA
Class
3:3
CORE
Model
CORE 1-3
Type
UPS VFI
Range
1-3 kVA
Class
1:1
CORE 3K TL
Model
CORE 3K TL
Type
UPS VFI
Range
3 kVA
Class
1:1
CORE
Model
CORE 6-10
Type
UPS VFI
Range
6-10 kVA
Class
1:1
HS105
Model
HS105
Type
UPS VFI
Range
50 - 100 kVA
Class
3:3
HS205
Model
HS205
Type
UPS VFI
Range
50 - 200 kVA
Class
3:3
HS305
Model
HS305
Type
UPS VFI
Range
50 - 300 kVA
Class
3:3
HS505
Model
HS505
Type
UPS VFI
Range
50 - 500 kVA
Class
3:3
UPS JR
Model
JR
Type
UPS VFI
Range
10 - 20 kVA
Class
3:3 / 3:1
MY 30K
Model
MY 30K
Type
UPS VFI
Range
30 kVA
Class
3:3 / 3:1
MZ 60K-200K
Model
MZ 60K-200K
Type
UPS VFI
Range
60 - 200 kVA
Class
3:3
NGS 40
Model
NGS 40
Type
UPS VFI
Range
40 kVA
Class
3:3
NHS 120
Model
NHS 120
Type
UPS VFI
Range
30 - 120 kVA
Class
3:3
PKX
Model
PKX
Type
UPS VFI
Range
10 kVA
Class
3:3
PRM 6
Model
PRM 6
Type
UPS VFI
Range
6 kVA
Class
1:1
UPS  WINTER
Model
WINTER
Type
UPS VI
Range
3 kVA
Class
1:1

SHORTCUTS

Do you need help?
Tel: +48 58 556 13 13
E-mail: info@comex.com.pl

comex Filing a Complaint
Tel: +48 58 556 13 13
E-mail: info@comex.com.pl